Simon Says Anything Goes. It's a spinner card with a butterfly made of three layers of tissue paper cut with the butterfly die from Pretty Peonies, stamped with the matching image in Soft Stone.
I cut a small piece of plastic packaging, folded it in half and matched it up with the butterfly layers. Then poked a whole and inserted a brad.
Then I put the brad through a paper layer of the top of the spinner element. I used the cut out of the spinner line to trace the space and wrote "flutter" in pencil several times. Then traced over it with a fine line pigment marker, then erased the pencil lines. I cut the spinner element twice and glued all the parts together. The top mat is attached with a single layer of foam tape.
Monday, September 29, 2014
Finishing Touch
Simon Says Finishing Touch. I used Simply Chartreuse cardstock (Papertrey Ink), some gold acrylic craft paint. Applied Wild Honey Distress Stain through Tim Holtz' Dot Fade Stencil. The stamps are from Club Scrap's Solstice kit.
This is an interactive piece for someone going through chemo. The iron filings are in an Impression Obsession Shake It Square Pouch. It makes the lightest weight iron filing card I've made so far. Place the pouch face down, add some iron filings, remove the adhesive cover, add a solid line of glossy accents. Put a light weight on the back cover and wait until it has dried (I learned this the hard way). If you have spilled any iron filings wrap a magnet in a coffee filter and then pick up all the iron filings. Open the iron filings container hold the coffee filter over it, and remove the magnet. The iron filings drop effortlessly into the container. Much much easier then trying to remove the iron filings from the magnet. Trust me. I learned this the hard way too.
I used 2.5" square die from Spellbinders to cut the opening for the pouch. It's a snug fit, but can be opened a little more if desired with the edge of a scissor. Run a line of Glossy Accents around the edge of the Shake-It Pouch and put the cover over it, running a finger around the edge of the opening.
I stamped the Solstice image again on a scrap of cardstock and used glossy accents to attach it to the top of a very strong magnet (the weak magnets barely move the iron filings. After it dries I cut off the excess cardstock. Be prepared for your scissors to stick to the magnet while you cut lol.
This is an interactive piece for someone going through chemo. The iron filings are in an Impression Obsession Shake It Square Pouch. It makes the lightest weight iron filing card I've made so far. Place the pouch face down, add some iron filings, remove the adhesive cover, add a solid line of glossy accents. Put a light weight on the back cover and wait until it has dried (I learned this the hard way). If you have spilled any iron filings wrap a magnet in a coffee filter and then pick up all the iron filings. Open the iron filings container hold the coffee filter over it, and remove the magnet. The iron filings drop effortlessly into the container. Much much easier then trying to remove the iron filings from the magnet. Trust me. I learned this the hard way too.
I used 2.5" square die from Spellbinders to cut the opening for the pouch. It's a snug fit, but can be opened a little more if desired with the edge of a scissor. Run a line of Glossy Accents around the edge of the Shake-It Pouch and put the cover over it, running a finger around the edge of the opening.
I stamped the Solstice image again on a scrap of cardstock and used glossy accents to attach it to the top of a very strong magnet (the weak magnets barely move the iron filings. After it dries I cut off the excess cardstock. Be prepared for your scissors to stick to the magnet while you cut lol.
Sunday, September 28, 2014
Butterflies in the Sky . . .
I gave myself the Reading Rainbow theme song earworm. Make It Monday #181: Paper Casting. I started with one of the reading circle stamps and the open book stamps. Then I put down one layer of toilet paper and a circle of butterfly sequins around the circle stamp. Then another 7 layers of toilet paper. After it was dry I lightly stamped the image.
Simon Says Anything Goes : ).
Simon Says Anything Goes : ).
Saturday, September 27, 2014
Double Shaker Card
This shaker card has two separate windows. One for the acetate sheet stamped with buildings from City Scene. The second window has sequins. The windows are made with the rectangle dies for the Make It Market kit: Shakers & Sprinkles. The monster is embossed with Zing!Opaque White Embossing Powder. The patterned paper is from DCWV Indian Summer paper pad. The cardstock is Vintage Cream. The patterned paper frame is inlaid to the card front.
Simon Says Anything Goes : ).
Simon Says Anything Goes : ).
Friday, September 26, 2014
Paper Casting
Papertrey Ink's Make It Monday #181: Paper Casting. I inked the flower from Rosie Posie with Peacock Feathers Distress Ink before I did the paper casting. When it had dried, I painted the flower center, the background and the foliage. It's stitched to two sheets of tissue paper with hemp jewelry twine. The background is Melon Berry patterned paper.
True Black cardstock makes the frame. The support is cut with Tim Holtz' Small Easel Die. Simon Says Anything Goes : ).
True Black cardstock makes the frame. The support is cut with Tim Holtz' Small Easel Die. Simon Says Anything Goes : ).
Labels:
Die,
Gift,
hand stitched,
Home Decor,
Make It Monday,
Papertrey Ink,
Rosie Posie set,
Simon Says,
Small Easel,
Technique,
Tim Holtz
Thursday, September 25, 2014
Papertrey Ink September 2014 Blog Hop
It's Papertrey Ink's September 2014 blog hop.
This month's inspiration.
I chose Smokey Shadow, Autumn Rose and Ripe Avocado as my colors.
And this sketch. I stamped the Smokey Shadow mat with the knit background stamp from Waltzingmouse's Faux Fun and Versamark Ink. The Buttons are cut with Buttoned Up #1 with Autumn Rose cardstock and embossed with clear embossing powder and tied with handspun silk embroidery thread. A little piece of foam tape pops up one of them.The leaves are from Make It Market Co. Beautiful Brushstrokes using Ripe Avocado cardstock and stamped with Versamark. The sentiment is from Say It With Style and painted in with a little Autumn Rose ink mixed with a little water. The cardbase and banner are Stamper's Select White.
This month's inspiration.
I chose Smokey Shadow, Autumn Rose and Ripe Avocado as my colors.
And this sketch. I stamped the Smokey Shadow mat with the knit background stamp from Waltzingmouse's Faux Fun and Versamark Ink. The Buttons are cut with Buttoned Up #1 with Autumn Rose cardstock and embossed with clear embossing powder and tied with handspun silk embroidery thread. A little piece of foam tape pops up one of them.The leaves are from Make It Market Co. Beautiful Brushstrokes using Ripe Avocado cardstock and stamped with Versamark. The sentiment is from Say It With Style and painted in with a little Autumn Rose ink mixed with a little water. The cardbase and banner are Stamper's Select White.
Wednesday, September 24, 2014
Iron Filings
Also known as Eileen Fahleens since Princess Judy Palmer told me about them back in WOYWW Week 268. The easiest method I've found so far is to use these Shake It Pouches by Impression Obsession. And if you have the square set from Spellbinders, one of them fits it almost exactly (varies with the paper/cardstock. This is thicker cardsotck, so I opened it a smidge with the edge of a scissor. The magnet will stick to even a tiny group of iron filings. A really strong magnet is worth the extra cost, the average dollar stores set will not be very much fun at all.
The Shake It Pouches come with adhesive, but Iron Fillings are heavy and tenacious so I use Glossy Accents as a seal instead. Patience is required. Put the pouch upside down, pour in some filings, apply Glossy Accents, apply background cardstock, press the edges together (without picking it up). Set it aside to dry. Really dry lol. Make a cover mat, or cut a window in the card front. The pouches make a much lighter card than making a well out of cardstock.
UPDATED to add: I had no luck just "substituting" iron filings for shaker card ingredients because they are really heavy in comparison and very very small. So the adhesive sheets just didn't work for me. They need to be sealed in with something like Glossy Accents and then make sure there are no gaps : ).
And if you spill any iron filings, wrap the magnet in a coffee filter before you use it to pick them up. then hold it over the jar and remove the magnet. The iron filings fall neatly into the jar without having to be wrestled off the magnet.
These pictures were taken while the card was lying flat on the desk. Fresh from the salon monster.
Bearded Monster.
Rapunzel Monster.
The Shake It Pouches come with adhesive, but Iron Fillings are heavy and tenacious so I use Glossy Accents as a seal instead. Patience is required. Put the pouch upside down, pour in some filings, apply Glossy Accents, apply background cardstock, press the edges together (without picking it up). Set it aside to dry. Really dry lol. Make a cover mat, or cut a window in the card front. The pouches make a much lighter card than making a well out of cardstock.
UPDATED to add: I had no luck just "substituting" iron filings for shaker card ingredients because they are really heavy in comparison and very very small. So the adhesive sheets just didn't work for me. They need to be sealed in with something like Glossy Accents and then make sure there are no gaps : ).
And if you spill any iron filings, wrap the magnet in a coffee filter before you use it to pick them up. then hold it over the jar and remove the magnet. The iron filings fall neatly into the jar without having to be wrestled off the magnet.
These pictures were taken while the card was lying flat on the desk. Fresh from the salon monster.
Bearded Monster.
Rapunzel Monster.
Labels:
card,
DIY Stamp,
Impression Obsession,
Interactive,
Iron Filings,
Magnet,
Monster,
Rubberstamp,
Shake It Pouch,
Technique
Subscribe to:
Posts (Atom)