Showing posts with label Cindy Loo cart. Show all posts
Showing posts with label Cindy Loo cart. Show all posts

Saturday, August 9, 2014

Bugs and Kisses, 1.1

This is a tweaking of a layout I did a few years ago (you can read the details here). The border ribbon never lay right for me, so I decided to replace it. I used my Gypsy and welded bugs & kisses (from the Cindy Loo cartridge) to a rectangle. I cut a second "g" and glued it on the title,and then outlined everything with a fine line black pigment pen.

I used a "decorative accent" from the candle department (around 2010 these were known as "skittles" by the crafty crowd I ran with) dyed with alcohol ink for the dot for the "i". One of the things I liked best was the ribbon came off (with a little bit of tugging, but the paper still had adhesive on it. Luckily I had some freezer paper left over from another project (okay it was a year ago lol) so I just put that over the adhesive until the new title was ready.

Tuesday, October 11, 2011

Monochromatic Color Card

And the inside says, "For helping me when I was stumped".

A brown Cricut Marker was used first (on the lowest pressure setting and the fastest speed). The "Thanks" sentiment was only written on and then filled in with Twinkling H2O's Indian Copper. Everything else was cut from the same cream/ivory cardstock and painted with Distress Inks. The card base is 5 x 5 made with Papertrey Ink Dark Chocolate.

And I couldn't have done it without my Gypsy and my Cricut Expression 2. The Thanks sentiment is on the first layer (hit return to design, NOT unload mat when layer 1 is done). The Doily and the Tree Stump are on the second layer because after they were drawn with the Cricut Marker, they were cut. If the Thanks was on the same layer, it would have been cut out also.

Cricut Images:
Thanks - Font Feature on Cindy Loo cartridge, 0.57".
Tree Stump - Create-A-Critter cartridge, 3.63".
Leaf Doily - Doily Feature on Sophie cartridge, 4.96"

Coloring.
Thanks, Indian Copper Twinkling H2O's painted in the lines drawn with Cricut marker.

Tree Stump. top layer, pressed on Antique Linen Distress Ink pad, face layer, painted with Vintage Photo "paint" made by smudging the ink pad on a non-stick work surface and spritzing with water, applied with an aqua brush, then put in puddle of "paint" made with Rusty Hinge Distress Ink. Base, put in a puddle of "paint" made with Vintage Photo Distress Ink.

Leaf Doily. Painted with "paint" made from Wild Honey Distress Ink applied with an aqua brush. While the doily was still wet, I sort of gently scrunched the leaves, which held the scrunch when they were dried.

Wednesday, July 6, 2011

On Your Marker, Get Set, Scrap!

Hello everyone! It's my turn to be the guest designer at The Bugbytes. For this layout you need a gypsy, an E2, brown cricut marker, Cindy Loo cartridge and Stretch Your Imagination cartridge.

On layer one arrange the caption using the Cindy Loo font feature at 1.06". The 4.35" frame is made with the frame feature with the bird house layer placed on top of it.

The scallop is on layer 2 with the inner square hidden with the hide contour feature.

Insert the marker (with the pressure set at 1) and "cut" layer 1, then after it is finished hit "return to design", go to layer 2 and "cut" again. Then unload the paper.

Fill in the scallops and birdhouse doors by hand. Add dots to the inner frame and wash with a small amount of water and a brush to spread color. Draw flowers around the outside. Cut the birdhouse on the inside of the frame with a craft knife so a photograph can be slid under it.

Tuesday, October 26, 2010

Guest Designer at Tuesday Treats

Today is my first post at Tuesday Treats as a Guest Designer. When the gypsy first launched every bit of the image had to be on the mat or nothing would cut at all. The large mat is made with two 12 x 12 inch sheets placed side by side on a 12 x 24 inch mat using the 10th image with the Phrase feature with the size set at 19.54" height. The height for the smaller mat is set at 10.54". The apple and tree are also from Create-a-Critter.

The font is from Cindy Loo. I attached the negative cut to the right hand page with some painters tape on the left side. I used it to place the letters on the page. Leaving it unattached on the right allowed me to open it and make sure I had only glued the letters to the page. I used the journal mat to make a pocket for more journaling. The paperclip is from Fabulous Finds and the middle and top of the paperclip is glued to the extra journaling note. Most of the paper comes from the August Club Ruby Designers kit.